User manual
Table Of Contents
- Manual for SH-05G
- Checking operation method
- Basic package
- Contents/Precautions
- Before Using the Tablet
- docomo LIVE UX
- Call
- Mail/Web Browser
- Apps
- Tablet Settings
- File Management
- Data Communication
- External Device Connection
- International Roaming
- Appendix/Index
- Using mobile phone with your manners!
- Carrying out various procedures, checking subscription, etc. online
- For Inquiries
37
Call
SH-05G_E_04.fm
[37/41]
■ Answering by answering memo
1
When a call is received, the ringtone sounds
and the incoming lamp flashes
2
[|]/[Absence Memo]
Playing an answering memo
1
In the home screen, []]
2
[|]/[Call settings]
3
[Call/Ans Memo]
4
[Answering Memo List]
5
Select an answering memo
You can carry out operations such as using a hands-free call
and adjusting the in-call volume according to the usage
condition during a call.
1 Mute
Enable or disable mute setting on a current call.
2 End call
End a call.
3 Speaker
You can talk with hands-free.
When a Bluetooth device is connected, you can switch audio
output ports.
4 Dialpad
You can enter touch-tone signals.
5 Hold
Hold/Unhold a current call.
6 Switch to video
Switch to a video call.
7 The other party's image
If you cannot receive the other party's image, [K] is
displayed.
8 Your own image
9 Switch camera
Switch to the front camera/back camera.
■ Adjusting the in-call volume
1
x/y during a call
■ Switching to full screen display
Switch the video call screen to the full screen display.
1
Touch the screen during a call
: To disable the full screen display: Touch the screen
■ Adding a call
Place a current voice call on hold and make a call to another party.
Subscription to Call Waiting Service is required to add a call.
1
[|] during a call/[Add call]
2
Enter a phone number/[0]
: Touch the other party put on hold to switch to whom you talk.
■ Switching to voice call
Switch to a voice call during a video call.
1
[|] during a call/[Switch to voice call]
■ Displaying dialpad
Display the dialpad during a video call.
1
[|] during a call/[Dialpad]
■ Switching audio output port
Set whether to talk with hands-free during a video call. When a
Bluetooth device is connected, you can switch audio output ports.
1
[|] during a call/[Switch audio output
destination]
2
Select an audio output port
■ Switching image of camera
Set whether to send your own image during a video call.
1
[|] during a call/[Camera OFF]/[Camera ON]
■ Switching image area
Switch displaying area of the other party's/your own image during a
video call.
1
[|] during a call/[Switch video area]
■ Voice memo
1
[|] during a call/[Sound Memo]
2
[Stop]
Operation during a call
Voice call screen
Video call screen
Note the followings to use hands-free or video call.
・ Speak approximately 20 to 40 cm away from the mouthpiece.
When the surroundings are noisy, the sound may break up
and the call may not be satisfactory.
・ When calling outdoors, in a location where surroundings are
noisy or where the sound echoes loudly, use an earphone/
microphone.
・ If the sound breaks up during a hands-free call, lower the
in-call volume.
In the following cases, [(high-quality sound)] is displayed.
While receiving a voice call/During a voice call in VoLTE
While making a video call or receiving a video call/During a
video call
SH-05G_E.book 37 ページ 2015年7月15日 水曜日 午後1時45分