ENGLISH FRANÇAIS ESPAÑOL LC-52LE920UN LC-60LE920UN LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN ® IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANT : Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil. IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
ENGLISH LC-52LE920UN LC-60LE920UN LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No.: Serial No.: IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
IMPORTANT INFORMATION DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-52LE920UN/LC-60LE920UN This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
IMPORTANT SAFETY INSTRUCTIONS Caring for the front panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel. • Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
Contents IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . . . 1 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 DEAR SHARP CUSTOMER . . . . . . . . . . . . . . . . . . . . . . . 3 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . 3-5 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 QUICK REFERENCE Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 QUICK INSTALLATION TIPS . . . . . . . . . . . . . . . .
Supplied Accessories Make sure the following accessories are provided with the product. LC-52LE920UN Remote control unit (g1) Page 8 ■ Operation manual (g1) “AAA” size battery (g2) Page 9 Cable clamp (g1) Page 8 Stand unit (g1) Page 7 Wireless LAN adapter (g1) Page XX ■ Connection guide (g1) • Always use the AC cord supplied with the TV. • The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
QUICK REFERENCE QUICK INSTALLATION TIPS 1 2 Attach your antenna to the back of the television. (See page 9.) Connect the AC plug for the television into the AC outlet. Using the Remote Control Unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. 2 1 1 AC outlet • Place the TV close to the AC outlet, and keep the power plug within reach.
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use commercially available cables.
Part Names TV (Front) Center Icon illumination (See page 30.) Remote control sensor OPC sensor *1 (See page 24.) VOL//. CHV/U INPUT POWER *2 MENU *1 OPC: Optical Picture Control *2 See pages 17 and 22 for using the touch sensor panel.
Part Names Remote Control Unit 1 1 POWER: Switch the TV power on or enter standby. (See page 17.) 2 TV, STB, DVD•VCR, AUDIO: Switches the remote control for TV, STB, DVD, BD, VCR and AUDIO operation. (See pages 41 to 42 for details.) 18 * To enter the code registration mode, you need to press an appropriate button (STB, DVD•VCR or AUDIO) and DISPLAY at the same time. 19 2 3 External equipment operational buttons: Operate the external equipment.
Introduction to Connections Experiencing HD Images An HDTV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get HD programming from the following: • Over-the-air broadcasting via HD quality antenna • HD cable/satellite subscription • HD compatible external equipment • For information on updating to HD programming, ask your cable/satellite service provider. Types of Connection Image quality differs depending on the terminal used.
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 12 and 19.) For connecting the TV to external equipment, use commercially available cables. CAUTION • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting to External Equipment ■ When using Component cable (COMPONENT): • Blu-ray disc player • DVD player • HD cable/satellite set-top box Audio cable Component video cable PR (Red) PB (Blue) Y (Green) AUDIO-R (Red) AUDIO-L (White) COMPONENT OUT Back panel horizontal inputs • To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component cable and set the equipment to 1080p output.
Connecting to External Equipment Connecting an Audio Amplifier ■ When using optical fiber cable: It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 28 for details.) PCM audio outputs from the terminal. Back panel vertical inputs Optical fiber cable OPTICAL DIGITAL AUDIO INPUT • Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.
Connecting to External Equipment Connecting a PC Refer to page 48 for a list of PC signals compatible with the TV. ■ When using HDMI cable (HDMI 1, 2, 3 or 4): Back panel vertical inputs HDMI-certified cable HDMI OUT • Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 48.
Watching TV Turning On/Off the Power Initial Installation When you turn on the TV for the first time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 9.) 2. Connect the antenna cable to the TV. (See page 9.) 3. Plug in the AC cord to the AC outlet. (See page 8.
Watching TV Antenna/STB Select the type of connection you will use to watch TV. 3 Press c/d to select "Antenna" or "Set Top Box", and then press ENTER. • To watch TV via an antenna or cable connection (without using a set-top box), select "Antenna", and then go to step 4. • To watch TV via a set-top box, select "Set Top Box". The setup screen for the connected equipment is displayed. See the operation manual of the connected equipment for setting up the equipment.
Direct Button Operation MUTE Mutes the current sound output. Press MUTE. • " " will be displayed on the screen for 30 minutes, and the sound is silenced. • Within 30 minutes of pressing MUTE, mute can be canceled by pressing VOLk/l or MUTE. • Mute will be canceled after 30 minutes have passed. However, the TV will not suddenly output a loud sound as the volume level is set to 0 automatically. Sleep Timer Changing Channels You can change channels in several ways.
Direct Button Operation AV MODE INPUT AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. Press AV MODE. Current AV MODE displays. • Press AV MODE again before the mode displayed on the screen disappears.
Direct Button Operation Closed Captions and Digital Closed Captions Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider. 1 Press CC. Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider).
Direct Button Operation VIEW MODE You can select the screen size. 1 Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select a View Mode that has its own aspect ratio. ■ For HD programs Stretch: Suitable for viewing wide-screen 1.
On-Screen Display Menu On-Screen Display Menu Operation LCFONT embedded System Options : Select Initial Setup ENTER : Enter RETURN Picture Settings Information : Back MENU : Exit Example Example Menu System Options : Select Picture Settings Initial Setup ENTER : Enter RETURN : Back MENU : Exit Menu Picture Settings Information Picture Settings AV MODE (Changing Pic.Quality) AV MODE (Changing Pic.
On-Screen Display Menu Menu Items • When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu may be changed. • Some menu items may not be displayed depending on the selected input source. Picture Settings AV MODE (Changing Pic.Quality) ...... Page 24 OPC ................................................. Page 24 Backlight .......................................... Page 24 Contrast ........................................... Page 24 Brightness .........
On-Screen Display Menu AV MODE (Changing Pic.Quality) Picture Settings Adjusts the picture to your preference with the following picture settings. Example Picture Settings The audio and video settings can be changed to suit the program or input content being watched. Select from the following AV modes.
On-Screen Display Menu Color Temp. (Color Temperature) For a better white balance, use color temperature correction. High: Mid-High: Middle: Mid-Low: Low: White with bluish tone White with reddish tone White balance can be adjusted between a maximum of +30 and a minimum of –30 for each color temperature.
On-Screen Display Menu Auto Volume Audio Settings You can adjust the sound quality to your preference with the following settings. Example Audio Settings Menu Different sound sources sometimes do not have the same loudness level, such as a program and its commercial breaks. The Automatic Volume Control (Auto Volume) reduces this problem by equalizing levels. High: Reducing the loudness gaps among different sound sources strongly.
On-Screen Display Menu Power Saving Power Control Power control setting allows you to save energy. Example Menu Power Control Power Control Audio Only This function allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan. Standard: Optimizes power reduction based upon video content. When set to "Standard", " " appears on the screen. Advanced: Optimizes power reduction based upon video content and engages OPC.
On-Screen Display Menu Freeze Allows you to capture and freeze a moving image that you are watching. System Options Example System Options Menu • Select "Freeze" again on the menu and press ENTER to return to the normal image. System Options • You can select Freeze by pressing FREEZE on the remote control unit. See page 18 for details of Freeze function. View Option Change Audio Allows you to change the audio when multiple audio is available for the program you are watching.
On-Screen Display Menu Change CC Allows you to change the Closed Caption display. Select "Change CC" on the menu to display the Closed Caption information. • The information displayed varies depending on the program you are watching. • You can change Closed Caption by pressing CC on the remote control unit. See page 20 for details of Closed Caption function.
On-Screen Display Menu Caption Setup This function allows you to adjust the closed caption screen appearance to suit your preference. You can adjust 7 items: "Caption Size", "Font Style", "Foreground Color", "Foreground Opacity", "Background Color", "Background Opacity" and "Character Edge". Example: Selectable items available for "Font Style". Default: The font specified by broadcasting station or default font. Type 0: Proportional font used in the MENU screen. Type 1: Monospaced with serifs.
On-Screen Display Menu Initial Setup Example Initial Setup Menu Initial Setup • See Initial Installation on page 17 for setting each item. • If no channel is found, confirm the type of connection made with your TV and try "EZ Setup" again. • If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted.
On-Screen Display Menu Antenna Setup-DIGITAL In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the "Antenna SetupDIGITAL" screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength. Signal Strength: The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel.
On-Screen Display Menu V-Chip V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV. "V-Chip" and "Status" will not be selectable from the menu if you do not first configure your secret number. • The U.S.
On-Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
On-Screen Display Menu 2 Press a/b to select “Software Update”, and then Information press ENTER. Example Information Menu • If you have already set the Secret No., go to step 3. Example Menu Information Information Information Identification Identification Digital Caption Info. Digital Caption Info. Software Update Software Update Netflix Help VUDU Help 1 Press MENU to display the MENU screen, and then press c/d to select "Information".
On-Screen Display Menu ■ Updating the Software via the Network 1 Press c/d on the Manual Update screen to select "Network Update", and then press ENTER. • The TV connects to the network and checks for updates. • To cancel, press ENTER. 4 When the software is successfully updated, a screen is displayed indicating that the update process is completed. Press ENTER. The TV restarts, and it takes a while until the system update is completed. Do not unplug the AC cord. Connecting to Internet..
On-Screen Display Menu 3 Press ENTER to start checking the data in the USB memory device. 5 Press ENTER to start updating. Press "OK" to restart the TV and complete the update. Wait several minutes and do not unplug the AC cord. Insert the USB memory device containing the software update file. OK OK 4 During the data checking, “Checking” blinks. Example Now checking the data in the USB memory device. Now updating 50% Do not unplug AC cord.
Enjoying Photo/Music/Video Playback You can enjoy viewing photos, listening to music and watching videos from external USB memory devices. • • • • Depending on the USB memory device, the TV may not be able to recognize the recorded data. Use only alphanumeric characters for naming files. File names over 80 characters (may vary depending on character set) may not be displayed.
Enjoying Photo/Music/Video Playback Slide Show Photo Mode The photos displayed on the thumbnail selection screen are displayed as a slide show. ■ Buttons for slide show operation Viewing Thumbnails Example ... picture 1 picture 2 picture 3 picture 4 picture 5 ... Buttons RETURN C (blue) D (yellow) Description Return to the thumbnail selection screen. Reveal/hide the Guide Display. Display the USB MENU screen. • The selected BGM is played repeatedly.
Enjoying Photo/Music/Video Playback Set/Reset All Slide Show Image Set or reset the images to be displayed. 1 Press D to display the USB MENU screen. 2 Press a/b to select "Set All Slide Show Image"/ "Reset All Slide Show Image", and then press ENTER. • When you select "Set All Slide Show Image", checkmarks are added to all the images. • When you select "Reset All Slide Show Image", remove all the checkmarks from all the images.
Enjoying Photo/Music/Video Playback Video Mode Music Mode Example Example ... music 1 music 2 music 3 music 4 music 5 I I I I I I I SONG_01.MP3 SONG_02.MP3 SONG_03.MP3 SONG_04.MP3 SONG_05.MP3 SONG_06.MP3 SONG_07.MP3 SONG_03.MP3 ... ... video 1 video 2 video 3 VIDEO_01.avi VIDEO_02.divx VIDEO_03.divx VIDEO_04.avi VIDEO_05.divx VIDEO_06.divx VIDEO_07.avi 3:42 4:55 4:35 4:08 4:20 3:55 4:26 video 4 video 5 I I I I I I I ...
Enjoying Photo/Music/Video Playback ■ Using the control panel You can use the control panel for video playback operations. You can call up this operation panel by pressing MENU after you press a/b to select "Control (USB)" from "System Options" > "View Option". USB Memory Device Compatibility USB memory device File system Photo file format Music file format Tool PLAY 0:04:11 / 0:07:42 Resume jump • Reverse/fast forward continues from one file to another during continuous playback.
Other Viewing Options Presetting Remote Control Function Operating the Connected Equipment You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, BD, LD) using the presetting manufacturer function of your remote control unit. To operate the connected equipment, press STB, DVD∙VCR or AUDIO to select your device. (STB (cable converter), DVD, BD, VCR or AUDIO.) The remote control unit button will function as follows.
Other Viewing Options Manufacturer codes VCR BRAND AUDIO DYNAMICS BROCKSONIC CANON CRAIG CURTIS MATHIS DBX EMERSON GE INSTANT REOLYA JC PENNEY JVC KENWOOD MAGNAVOX MAGNIN MEMOREX MONTGOMERY WARD NEC PANASONIC PENTAX PHILCO PHILIPS QUASAR REALISTIC SAMSUNG SHARP SONY SYLVANIA TATUNG TEAC TMK YAMAHA DVD/BD/LD BRAND DENON JVC KENWOOD MAGNAVOX MARANTZ MITSUBISHI PANASONIC PHILIPS PIONEER PROSCAN RCA SAMSUNG SHARP SONY TOSHIBA YAMAHA ZENITH REMOTE CONTROL CODE NUMBER 09 13 04 12 04 09 10, 13, 14 04 04 04 09
Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV. • AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Using AQUOS LINK AQUOS LINK Setup Example System Options Menu System Options AQUOS LINK Setup Channel Select Key This function can be set for each input terminal. On: The remote control unit of the TV can be used to select the channel, display program information, and perform other operations of a connected AQUOS LINK-compatible recorder. Off: This function does not work.
Using AQUOS LINK Link Operation Menu Menu Link Operation Link Operation Recorder Power On/Off Device Operation panel Play from Rec. List One Touch Recording Show Start Menu This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing (REC on the remote control. Change Media of Device Link Booking (Rec. Book) Prepare the connected AQUOS LINK-compatible recorder for recording.
Using AQUOS LINK Using the Device Operation Panel You can use the device operation panel to control playback operations. 1 Press OPTION to display the Link Operation Menu screen. 2 Press a/b to select “Device Operation Panel”, and then press ENTER. 3 Press a/b/c/d to select the desired operation. • This function works only when AQUOS LINK-compatible equipment with the Device Control Panel function is connected.
Using a PC Displaying a PC Image on the Screen VIEW MODE You can select the screen size. 1 Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select a View Mode that has its own aspect ratio. • Connect the PC before making adjustments. (See page 16.
Using a PC Setting Audio Input 1 Press MENU to display the MENU screen, and then press c/d to select "System Options". 2 Press a/b to select “Input Terminal Setting”, and then press ENTER. 3 Press a/b to select “PC input”, and then press 4 ENTER. Press a/b to select a specific adjustment item, and then press ENTER to set each item. 5 Press a/b (or c/d) to select or adjust the desired setting, and then press ENTER. Adjusting the PC Image Auto Sync.
Using a PC RS-232C Port Specifications ■ PC control of the TV • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. ■ Command format Eight ASCII codes e CR C1 C2 C3 C4 P1 P2 P3 Command 4-digits • This operation system should be used by a person who is accustomed to using computers. ■ Communication conditions Set the RS-232C communication settings on the PC to match the TV's communication conditions.
Using the Internet • By connecting your TV to a broadband system, you can access the Internet from the TV. • Display the “Sidebar Widget” on the screen to check out the latest Internet information and access a range of useful information for AQUOS users from the original home page*. • You can use "AQUOS Advantage Live" to obtain the latest software and information and to view Netflix and VUDU videos. * About the original home page • The original home page is a website set up specifically for AQUOS owners.
Using the Internet + Using the Wireless LAN Adapter When using the Sharp wireless LAN adapter (XXXXXXXX, supplied), make sure that no video/audio cables or other AC power cords are placed close to or on the wireless LAN adapter, as this may interfere with the wireless LAN signal and limit the LAN connection quality. Try to provide as much free space around the device for best performance. • Be sure to turn off the TV before connecting or disconnecting the Sharp wireless LAN adapter.
Using the Internet Internet Setup 5 Press c/d to select "Push button", and then press ENTER. • To configure the setting manually, select "PIN code". Follow the on-screen instructions and the operation manual of the access point to configure the settings. 6 Select "Next" to complete the settings. • The connection process starts and the WPS button on the access point can be pressed. 7 Press the WPS button on the access point. • Pressing the WPS button displays a confirmation screen.
Using the Internet Displaying Updated Information and Support Service This function can be used to display up-to-date information on the Sidebar Widget via the Internet and allow you to receive support service over the network. Sidebar Widget + If you cannot connect to the Internet Perform the procedures below to check your TV's network settings. 1 Press AQUOS NET repeatedly to display the Sidebar Widget.
Using the Internet Entering Text (Software Keyboard) When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. Caps Off/Caps On/Caps Lock If “alphabet” is selected in “Character Set”, this switches characters between uppercase and lowercase.
Using the Internet Using the Browser ENTER, a/b/c/d • Press a/b/c/d to select a link that you want to jump, and then press ENTER. EXIT About links • Web pages on the Internet often include “links” that allow you to jump to other web pages (or sites). • “Links” can take various forms, including words or images, but they always work in the same way letting you jump to the link destination when you select them. • Selected items (such as links of text input fields) are enclosed in a yellow frame.
Using the Internet Using the Toolbar Using Tabs You can use the toolbar to control the browser and to specify settings. You can use tabs to view up to 3 web pages at the same time. Each page appears in a separate tab, and you can switch between the tabs. 1 Press B on the remote control unit to display the Tab menu. • You can also display the Tab menu by clicking “ the toolbar. Selected item 1 Press D on the remote control unit to display the toolbar.
Using the Internet Saving the URL of the Current Page Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. Editing Bookmarks You can rearrange or delete the bookmarks. ■ Switching between the URL and title name 1 Press D on the remote control unit to display the toolbar. 2 Press c/d to select “ ” in the toolbar, and then press ENTER. • Your bookmarks list is displayed.
Using the Internet Browser Settings You can check or modify your browser settings from the Browser menu. The Browser menu includes a display settings menu and a security settings menu. 1 Press D to display the toolbar. 2 Press c/d to select “ ” in the toolbar, and then press ENTER. 3 Press c/d to select the settings menu you want to access. Security Settings Security: Save Setting: If you select this option, a message is displayed when you move from a protected page to an unprotected page.
Using the Internet Enjoying Movies and Some Other Applications via the Internet You can watch movies available on the Internet or make use of other Internet applications with this TV. 4 Obtain the Netflix activation code. + If you do not have a Netflix account 1 Press a/b to select "no-start my FREE trial", and then press ENTER. The screen of the TV Please check that the most current software is loaded on TV by selecting "Auto Update Setting" on "Software Update" (see page 34) or by visiting http://www.
Using the Internet 6 Using your PC, visit http://www.netflix.com/activate, and then enter the activation code displayed in step 5. The screen of the PC 9 The title you selected is displayed. • To return to the step 8, press a. Press a/b to select "play", and then press ENTER or d to start playback. The screen of the TV • After a period of time, the TV will be activated, and the empty instant Queue screen will be displayed.
Using the Internet Enjoying Movies and Internet Applications with VUDU VUDU Movies is the leading HD on-demand video service. VUDU Movies is built into your TV and utilizes your existing Internet connection to deliver the highest quality on-demand video available today. Example VUDU Movies features: • True 1080p HD, the only service to offer 1080p quality video ondemand • Over 16,000 movies available on-demand • Over 3,000 movies available in HD, more than are available anywhere else • 5.
Using the Internet + If the Settings on the PC Are Incorrect The screen as shown below will be displayed. Following the instructions on the screen, send e-mail again and make all the necessary settings. Example Troubleshooting - VUDU VUDU cannot be accessed. • If you are able to access other network services (e.g. AQUOS Net) from your device, but are not able to access VUDU, please contact VUDU Customer Care at 1-888-554-VUDU (8838). • If you are not able to access any network services (e.g.
Using the Internet DISCLAIMERS This Sharp device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider. Sharp shall not be liable to you or any third party for your failure to abide by such authorization or terms of use.
Appendix Removing the Stand • Before detaching (or attaching) the stand, unplug the AC cord. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. ■ LC-52LE920UN Before attaching/detaching the stand • Before performing work, make sure to turn off the TV. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 1 2 1 2 Loosen the screw used to secure the stand cover and remove the cover.
Appendix Setting the TV on the Wall CAUTION • This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. • Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
Appendix Troubleshooting Problem Possible Solution • No power • Check if you pressed POWER on the remote control unit. • Is the AC cord disconnected? Page 8 • Has the power been turned on? Page 17 • Unit cannot be operated. • External influences such as lightning, static electricity, may cause improper operation. In this case, operate the unit after first turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes. • Remote control unit does not operate.
Appendix Problem Possible Solution Is connection to other components correct? Pages 12 to 16 and 43 Is the correct input selected? Pages 12 and 19 Is "On" selected in "Audio Only"? Page 27 If the PC image is not displayed, check the following: - When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monitor. - Check the resolution setting on the PC. Is a non-compatible signal being input? Page 48 • No picture • • • • • Picture quality of HD programs is poor.
Appendix Troubleshooting - Error Message The example of an error message displayed on a screen Error code Possible Solution • Failed to receive broadcast. E202 • Check the antenna cable. Check that the antenna is correctly setup. • No broadcast now. E203 • Check the broadcast time in the program guide. • An incompatible audio signal has been received. Change the output device audio settings to PCM. • This message is displayed when an audio format other than PCM is input.
Appendix Specifications Item LCD panel TV Function Model: LC-52LE920UN 1 Model: LC-60LE920UN 60o Class (60 1/32o Diagonal) Size 52o Class (52 /32o Diagonal) Resolution 2,073,600 pixels (1,920 g 1,080) TV-standard (CCIR) American TV Standard ATSC/NTSC System Receiving Channel VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled channel only) Digital Terrestrial Broadcast (8VSB) 2-69ch Digital cable*1 (64/256 QAM) 1-135ch (non-scrambled channel only) Audio multiplex Audio out BTSC S
Appendix Information on the Software License for This Product ■ Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
75
Dimensional Drawings Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) LC-52LE920UN 49 5/8 (1260) 19 1/16 (484) 25 23/32 (653) 31 15/16 (811) 1 63/64 (50) 33 29/32 (861) 45 9/16 (1157) 21 17/64 (540) 1 35/64 (39) 6 15/64 (158) AN-52AG4 15 3/4 (400) 6 25/32 (172) 15 3/4 (400) 2 41/64 (67) 13 25/64 (340) 1 35/64 (39) 4 11/64 (106) LC-60LE920UN 22 27/32 (580) 1 37/64 (40) 6 55/64 (174) AN-52AG4 15 3/4 (400) 4 49/64 (121) 15 3/4 (400) 21 1/2 (546) 29 41/64 (752.
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in Mexico Imprimé au Mexique Impreso en México TINS-E587WJZZ 10P06-MX-NM