Service manual
SJ-40J-GY/ BE
SJ-W40J-GY/ BE
SJ-36J-GY/ BE
SJ-W36J-GY/ BE
8
2. R & L DOOR / DUAL SWING DOOR
(1). Structure
Note
Do not destroy or damage the refrigerator body's
structure or internal structure intentionally.
Do not put any objects on the lower hinge or lower
hinge pin.
Please pay attention to the lower hinge pin and the
cam, do not let them get stuck.
Do not add oil to the refrigerator body, pulley, lower
hinge, since the plastic components will be
influenced by different kinds of oil.
Do not open the door of the refrigerator compartment
forcibly, the door may fall off or cause the personal
injury.
If the door can not be opened, please check the part
shown on the right figure to see if it is got stuck by
the foreign objects.
Figure F-3
The explanation of the operation manual
1
The hinge pins on both right and left sides are supported with the projection
A
A'
of the door cam.
2
When the door is pulled, the hinge pin is guided to the groove
C
and the door is moved approx. 2 mm sideward.
When the hinge pin is engaged with the “J shaped” groove
D
of the projection
A'
of the door cam on the opposite
side, the door will be locked.
3
According to the opening degree of the door,
3
-1: Hinge pin and groove
C
3
-2: Hinge projection
b
and door cam projection
B
3
-3: Hinge projection
b'
on the opposite side and the projection
A'
of the door cam
3
-4: Hinge projection
a'
on the opposite side and the projection
A'
of the door cam
Any one of the above guides keeps the stage in which the door is moved approx. 2 mm sideward.
4
When the door is closed, the procedure of
1
thru
3
is reversed.
Even if the left and right doors are opened at the same time, both doors do not get off since the
width dimension between the projections
A
and
A'
of the door cam is small than that between the
left and right hinge pins.
Figure F-5
approx. 2mm
b'
a'
L
I
b
1
2 3
3
D
B'
A'
33-3
3-2
2
3
C
-1
3-4
Hinge pin
Door cam
Door cam projection
Door cam projection
A
Door cam projection
a
Hinge projection
Hinge
projection
B
Door cam projection
A'
Door cam projection
means the part of the main body side.
Hinge projection
Groove
Groove
Hinge projection
Figure F-4
Cam
Lower hinge pin
Lower hinge
Pulley
R&L structure of the
refrigerator body
R&L structure of
the door
(Positioned at the
four corners of the door)
(hinge projection)