User Manual

8
Control panel
Select
button
Switching
button
Enter button
Controlling temperature
Icon Meaning Default setting
Freezer compartment -18°C
Refrigerator
compartment
3°C
Useful modes
Icon Meaning Default setting
Extra cool
OFF
Express freezing
Express cool
Plasmacluster
Energy saving
Additional modes
Indicator Meaning Default setting
Door alarm
ON
Sound of button
operation
Note
• When you press one of the
buttons, all icons ash once and
show the standby display. If the
refrigerator stops because of
power failure, the modes except
for Extra cool and Express
freezing function the same way as
before at the time of re-power.
• Operation is invalid while the
freezer door is open.
• Mode icons or indicators
in operation light up on
the standby display.
When Express cool is
in operation, the icon
ashes on the standby
display.
• When there is
no operation for
approximately
1 minute, the
display returns to
the standby display automatically.
The standby display turns off if
there is no operation for another
1 minute.
Turn-on state
Operations of useful modes
Display
1
Select the mode icon.
(e.g. Extra cool)
2
Select on/off.
(off)
3
Complete the setting.
(Beep)
Mode icon turns
on.
Mode icon turns
off on the standby
display.
“Express cool”only
Complete the setting by pressing
for 3 seconds or more.
(Beep, Beep, Beep)
“Express cool”
only
(Flashing)
Flashing
When press button, the icons
change in the order shown as below.
:
Standby display
Useful modes
Operation of additional modes
Summary Cancel operation Display
Door alarm
• When the refrigerator door is left open for over 1 minute,
door alarm sounds once, and again after 1 minute.
• If the door is left open for approx. 3 minutes, the alarm
sounds continuously.
• The alarm stops after the door is closed.
Press
and simultaneously
for 3 seconds or more.
(Beep, Beep, Beep)
The indicator
turns off.
Sound
of button
operation
• When you want to switch off button operation sound.
Press
and simultaneously
for 3 seconds or more.
(Beep, Beep, Beep)
The indicator
turns off.
Note • When you want to turn on the additional mode, follow the same step again. (The indicator turns on.)
(B658).indb 8 2015/06/16 13:49:44