- Real Time Video Cassette Recorder Instruction Manual

SUPERIMPOSE DISPLAY
Selecting the Superimpose Display
You can select to display or not the date, time, tape
speed mode and number of alarm recordings.
1
Turn the power on to all devices used.
2
Press the MENU button to display the MAIN MENU.
3
Turn the JOG dial to select the “2.DISPLAY/SW
OUT SET” line, then turn the SHUTTLE ring
clockwise.
ø The (DISPLAY/SW OUT SET) menu appears.
<DISPLAY@SET>@@@@SET@UP
DATE@@@@@@@@@@@@@Y
TIME@@@@@@@@@@@@@Y
SPEED@@@@@@@@@@@@Y
ALARM@COUNT@@@@@@Y
<SW@OUT@SET>
TIMING@@@@@@@@@@@FIELD
FIELD@@@@@@@@@@@@1
8H@MODE@@@@@@@@@@Y
4 Turn the SHUTTLE ring clockwise.
5
Turn the JOG dial to select the desired mode, then
turn the SHUTTLE ring clockwise.
SET UP . . . . . . . . . . . . Set each item (Individual)
ALL Y . . . . . . . . . . . . . . To set all items to “Y”
ALL N . . . . . . . . . . . . . . To set all items to “N”
ø If using the “SET UP” setting, continue with
steps 6 to 8.
6
Turn the JOG dial until the item to be changed is
highlighted, then turn the SHUTTLE ring clockwise.
7
Turn the JOG dial to set “Y” (displayed) or “N” (not
displayed), then turn the SHUTTLE ring clockwise.
DATE . . . . . . . . . . . . . . The date appears
TIME. . . . . . . . . . . . . . . The time appears
SPEED. . . . . . . . . . . . . The recording /playback
speed mode appears
ALARM COUNT. . . . . . The number of alarm
recordings appears
8
Repeat steps 6 and 7 when setting other items.
9
When finished, press the MENU EXIT button.
NOTE:
œ When the ON SCREEN button is pressed and the
display appears, the items for which “Y” have been
set are recorded. The items for which “N” was set at
step 7 above are not recorded.
Changing the Superimpose Display
Position
1
Turn the power on to all input devices to the VCR.
ø The superimpose display appears.
ø If the superimpose display does not appear,
press the ON SCREEN button. The display will
be turned on and off alternately each time the
ON SCREEN button is pressed.
10-15-2002@TUE@000
15:20:00@@@@@8
2
To change the display position, press the SHIFT «
(or ]) button.
ø The display will move towards the right (or the
bottom).
NOTES:
œ If the SHIFT « (or ]) button is kept pressed for 1
second or more, the display will move at a faster
speed.
œ The display position cannot be changed during
recording.
RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002
English
13