Operation Manual

E-20
Model UA-HD60E UA-HD50E UA-HD40E Power supply 220-240 V 50-60 Hz Fan Speed Adjustment
MAX MED LOW MAX MED LOW MAX MED LOW
CLEAN AIR
Fan Speed (m
3
/hour)
396 240 90 306 186 60 216 144 60
Rated Power (W)
80 24 5.5 54 17 5 25 12 5
Noise Level (dBA)
55 45 25 55 43 23 47 37 23
CLEAN AIR & HUMIDIFY
Fan Speed (m
3
/hour)
366 240 90 288 186 60 180 144 60
Rated Power (W)
702674920719147
Noise Level (dBA)
54 45 25 54 43 23 43 37 23
Humidifi cation (mL/hour)*1
660 480 230 600 460 190 440 370 190
Recommended Room Size (m
2
)*2 ~48 ~38 ~26
High density Plasmacluster ion recommended room size (m
2
)
*3 ~35 ~28 ~21
Water Tank Capacity (L) 3.0 2.5 2.5 Sensors
Dust/Odour/Temperature & Humidity Dust/Odour/Temperature & Humidity
Dust/Temperature & Humidity
Filter type
Dust collection HEPA with Microbial control *4 Deodorization Deodorizing
Cord Length (m) 2.0 Dimensions (mm) 420 (W) × 242 (D) × 637 (H) 399 (W) × 230 (D) × 615 (H) 399 (W) × 230 (D) × 615 (H) Weight (kg) 8.6 7.9 7.9
*1 • Humidifi cation Amount changes in accordance with indoor and outdoor temperature and humidity. Humidifi cation Amount increases as temperatures rise or humidity decreases. Humidifi cation Amount decreases as temperatures decrease or humidity rises. • Measurement Condition: 20 ºC, 30 % humidity (JEM1426) *2 • The Recommended Room Size is appropriate for operating the unit of maximum fan speed. • The Recommended Room Size area indicates the space where a certain amount of dust particles can be removed in 30 minutes. *3
• Size of a room in which approximately 7000 ions can be measured per cubic centimeter in the center of the room (at a height of approximately 1.2 meters from the
fl oor) when the product is placed next to a wall and run at the MED operation position.
*4
• The fi lter removes more than 99.97% of particles of 0.3-micron dust. (JEM1467)
Standby Power In order to operate the electrical circuits while the power plug is inserted in the wall outlet, this product consumes about 0.9 W of standby power. For energy conservation, unplug the power cord when the unit is not in use.
SPECIFICATIONS