Operation Manual

ENGLISH

E-9

Pull out the Humidifying Tray.

Fill the Humidifying Tray with

tap water by method

Install the Humidifying Tray.

Clean the Humidifying Tray if it becomes

dirty or there is a noticeable odour.

(Ref. E-14,E-15)

Humidify air passed through by vaporizing water pumped up from Humidifying Tray.

The unit can be used even without water in the Humidifying Tray.

• The Filter Frame is ﬂ oated up when

water is ﬁ lled.

• When carrying the Humidifying Tray,

hold it with both hands or grip the Tray

Handle.

• Gently ﬁ ll it with water to avoid splash

water.

• Do not ﬁ ll beyond the “FULL” indicator.

The Humidifying Tray does not get into

the unit if water is ﬁ lled too much.

• Do not expose the unit to water. Doing so can cause a short circuit or electrical shock.

• Use only fresh tap water. Using other water sources risks the growth of molds, fungi, or bacteria.

• Do not use hot water (40 ºC), chemical agents, aromatic substances. Doing so can deform the unit

or cause it to malfunction.

• When removing and installing the Humidiﬁ ying Tray, be careful not to spill any water.

• Return the Tray Handle to its original

position before installing.

Handle

FULL

Tray Handle

Separator

Locate the Handle

in front of Separator.

Do not locate the

Handle on or behind

Separator.

REFILLING THE HUMIDIFYING TRAY

CAUTION