Operation Manual

ENGLISH
E-13
CARE AND MAINTENANCE
The fi lter Indicator Light will turn
on after approximately 720 hours.
(30 days × 24 hours =720 hours)
In case of using at the location where air pollution and odour are
signifi cant, maintain frequently even if Filter Indicator Light is not ON.
Gently remove dust with an appropriate cleaning tool,
such as a vacuum cleaner with the proper attachment.
After performing
maintenance, reset
the Filter Indicator.
Press more than
3 seconds.
This is a reminder to perform the
maintenance described below.
(Ref.E-13,E-14,E-15,E-16)
Deodorizing Filter
(Ref.E-16)
Back Panel
1. Add a small amount of kitchen detergent to
water and soak for about 10 minutes.
• DO NOT apply excessive pressure when
scrubbing the back panel.
2. Rinse off the kitchen detergent with clean water.
3. Completely dry the fi lter in a well-ventilated area.
1. Remove the Back Panel and removing
the Sensor Filter.
2. Gently remove dust from the Sensor with
an appropriate cleaning tool, such as a
vacuum cleaner with the proper attachment.
3. If the Sensor Filter is overly dirty, wash it
with water and dry it thoroughly.
Filter Frame
Humidifying Tray
(Ref.E-14,E-15)
Humidifying Filter
HEPA Filter (Ref.E-16)
Sensor Filter
Unit (Ref.E-16)
Sensor (internal)
Back Panel
Sensor Filter
How to clean when overly dirty
FILTER INDICATOR
CARE INDEX
BACK PANEL
SENSOR
CAUTION
NOTE
BACK PANEL
SENSOR