Operation Manual

E-7
PREPARATION
1
2
3
4
Remove the Back Panel.
Remove the plastic bag from the each
fi lter.
Install the fi lters in the correct order as
shown.
Install the Back Panel.
OPERATION
START STOP
The fan speed is automatically controlled depending on the
5 detection. (PM2.5 / Usual dust / Temperature /Humidity /
Light)
The unit releases Plasmacluster ions with strong airfl ow and
collects dusts while decreasing static electricity for 10 min-
utes. After that, the DUST sensor sensitivity is automatically
set to ”HIGH”and quickly detects impurities
and clean the air powerfully for 50 minutes.
• When the operation fi nishes after
60 minutes, the unit will return
to the prior operation mode. It is
able to change the other mode
during this mode.
• The Plasmacluster Ion can not
be turned “OFF”. (Ref. E-10)
NOTE
2
1
3
3
Back Panel
HEPA Filter
Deodorizing Filter
The fan speed is automatically controlled depending on the 7
detection. (Ref. E-1)
Click
Deodorizing Filter
HEPA Filter
Tag
• Front Display, Cleanliness Monitor and Air Outlet LED
automatically switch ON and OFF based on room
brightness. (When light control is set to "Auto". Ref. E-11)
NOTE
NOTE
• When replacing the fi lter, making a memo of the start of
use date is recommended.
START/STOP
CLEAN ION SHOWER MODE AUTO MODE
(UA-HG40E)
INTELLIGENT MODE
(UA-HG60E / UA-HG50E)
FILTER INSTALLATION
Always be sure to remove the
power plug from the wall outlet.