Operation Manual

E-2
ENGLISH
The air purifi er draws in room air through the
air intake, circulates it through a Pre-Filter, a
Deodorizing Filter and a HEPA Filter inside
the unit, and then discharges it through the air
outlet. The HEPA Filter can remove 99.97%
of dust particles as small as 0.3 microns that
pass through the fi lter and also helps absorb
odours. The Deodorizing Filter gradually ab-
sorbs odours as they pass through the fi lter.
Some odours absorbed by the fi lters will break
down over time, causing additional odours. De-
pending on usage conditions, and especially
if the unit is used in environments signifi cantly
more severe than a normal household, these
odours may become noticeable sooner than
expected. If these odours persist, replace the
fi lters. (Ref. E-15)
When minerals in tap water adhere to the fi l-
ters and become a hard and white, they
absorb
odours in the room that can cause the
emission
of an unpleasant odour when the humidifying
fi lter is dry. (Varies depending on water quali-
ty and other environmental factors)
If this occurs, perform humidifying fi lter mainte-
nance. (Ref. E-14)
•
The air purifi er is designed to remove air-suspended dust
and the odours.
The air purifi er is not designed to remove harmful gases
such as carbon monoxide contained in cigarette smoke.
The air purifi er may not completely remove an odour if the
source of the odour is still present.
Please read before operating
your new Air Purifi er
Pre-Filter
Deodorizing Filter
HEPA Filter
ENGLISH
Thank you for purchasing this SHARP Air Purifi er.
Please read this manual carefully before using
the air purifi er.
After reading, keep the manual in a convenient
location for future reference.
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
...
E-3
• WARNING
• NOTE
• CAUTIONS CONCERNING OPERATION
• INSTALLATION GUIDELINES
• FILTER GUIDELINES
PART NAMES
.............................................
E-5
• FRONT
• BACK
• OPERATION PANEL
• FRONT DISPLAY
PREPARATION
..........................................
E-7
• FILTER INSTALLATION
OPERATION
...............................................
E-7
• START / STOP
• CLEAN ION SHOWER MODE
• INTELLIGENT MODE
(UA-HG60E / UA-HG50E)
• AUTO MODE
(UA-HG40E)
• PLASMACLUSTER ION SPOT MODE
• SELECTING MODE
• CHILD LOCK
• HUMIDIFICATION SETTING
(REFILLING THE WATER TANK)
• ON TIMER
• OFF TIMER
• SELECTING DISPLAY
• PLASMACLUSTER ION ON / OFF
• PATROLLING FUNCTION
• HOW TO CHANGE VARIOUS SETTINGS
CARE AND MAINTENANCE
.................
E-13
• FILTER INDICATOR
• CARE INDEX
• WATER TANK
• UNIT / BACK PANEL
• HUMIDIFYING FILTER AND TRAY
• HEPA FILTER / DEODORIZING FILTER
• FILTER REPLACEMENT
TROUBLESHOOTING
............................
E-16
SPECIFICATIONS
....................................
E-17
NOTE