Technical data

Chapter 2 - Installation
Mounting the GPS Receiver
The GPS Timing Receiver is designed for integral mounting within a
standard 19 inch telecommunications equipment cabinet.
Mounting in Equipment Cabinets
Two integral mounting flanges are provided on the ends of the front
panel of the unit. All cable connections are made at the rear of the
Timing Receiver. Refer to Figure 2-11.
Figure 2-11: Typical Mounting in Cabinet
It will not normally be necessary to install any cooling fans into the
cabinet containing the GPS Receiver. However, refer to the Technical
Specifications where installations are to be subjected to high ambient
temperatures.
GPS Timing Receiver Installation and Operation Manual
2-16