Specifications

7. Raise the development unit lock lever [A], pull out the development unit
[B], and place it on a clean sheet of paper.
8. Remove the filter bracket [C] (2 screws). (The development unit handle is
attached.)
9. Remove the toner tank [D] from the development unit (3 screws).
10. Pour one pack of developer [E] into the development unit while turning
the development roller knob [F] counterclockwise to distribute the
developer.
11. Reinstall the toner tank and the filter bracket on the development unit.
NOTE: Make sure that there is no gap [G] between the toner tank and the
development unit.
[A]
[B]
[A]
[C]
[E]
[F]
[D]
[G]
1 December 1990
3-6