Specifications

2.3 CASSETTE MODIFICATION
1. Take off the cassette cover [A].
2. Remove the side fences [B] (1 screw each) and the bottom plate [C].
3. Reposition the rear fence [D] in the desired paper size position (1 screw).
NOTE: Paper size positions are shown on the inside of the cassette.
4. Reinstall the bottom plate.
5. Reinstall the side fences in the desired size positions.
6. Attach the proper paper size decals [E] on the cassette at the positions
shown.
7. Insert the actuator plate [F] in the slot on the front of the cassette as
shown.
[C]
[F]
[E]
[D]
[A]
[B]
1 December 1990
3-11