Specifications

2. Remove the filter bracket [D] (2 screws). (The development unit handle is
attached.)
3. Remove the toner supply unit [E] from the development unit (3 screws).
4. Pour one pack of developer [F] into the development unit while turning
the development roller knob [G] counterclockwise to distribute the
developer.
5. Reinstall the toner supply unit and the filter bracket on the development
unit.
NOTE: Make sure that there is no gap [H] between the toner supply unit and
the development unit.
6. Install the development unit as shown.
1 December 1990
3-15