Specifications

7. Shake the toner cartridge [A] well to distribute the toner evenly inside the

cartridge. Then, install the cartridge as shown.

8. Turn on the main switch and place a few sheets of white paper (A3 or 11"

x 17") on the exposure glass. Then, lower the platen cover.

9. Perform Color Developer Initial Setting and Toner Supply Unit Initial

Setting. To access the SP modes, press the following keys in order given.

(1) Clear Mode key

(2) Clear/Stop key

(3) Enter key

Access SP modes in the following sequence:

Step SP MODE

NUMBER

PROCEDURE

1 10 Color

Developer

Initial

Setting

Enter "10" using the numeral keys and

press the Enter key. "20" will be displayed

in the copy counter. Press the Start key for

initial setting.

2 63 Toner Supply

Unit Initial

Setting

Enter "63" using the numeral keys and

press the Enter key while holding down the

Point key.

10. Make a copy and check the copy quality.

[A]

1 December 1990

3-16