Specifications

4. Disconnect the connectors [A] from the main dc power supply unit [B] on
the copier.
5. Remove the main dc power supply unit (2 screws and 2 locking supports).
6. Install the locking support bracket [C] on the rear frame (1 screw) and
install the locking support (short) [D] on it.
7. Install the dc power supply unit bracket [E] on the main dc power supply
unit as shown.
8. Reinstall the main dc power supply unit.
9. Re-connect the connectors [A] on the main dc power supply unit.
[B]
[A]
[A]
[E]
[D]
[C]
1 December 1990
3-19