Specifications

10. Install the optional dc power supply unit [A] (2 screws and locking
support) as shown.
11. To prevent damage to the ac harness [B] when installing the optional
transformer [C], reposition the harness as shown.
12. Install the optional transformer [C] (2 screws).
13. Connect the connector [D] (3P/Black) of the transformer to CN418 on the
ac drive board [E] and the connector [F] (4P/White) to CN 100 on the
optional dc power supply unit.
NOTE: 1. The transformer connectors of the transformer are positioned
differently for the 220V and 240V machines.
In 220V machines, connect the connector [G] to CN418 as
shown.
In 240V machines, connect the connector [H] to CN418 as shown.
2. Connect the optional dc harness. (See the installation procedure
for each option.)
[A]
[E]
[D]
[C]
[F]
CN100 [B]
[H]
[G]
CN418
220V
240V
1 December 1990
3-20