Specifications

1.2 DIP SWITCHES
Copier Main Board
DIP SWITCH NORMAL FUNCTION
* 101-1 OFF Free run
** 101-2 OFF Forced start (Ready temperature by-passed)
Factory Use
101-3 OFF Clear counter and/or memory
101-4 OFF Service program mode access
* When this switch is set to ON, the SP mode is disabled.
Free run starts when the Start key is pressed. To stop the free run, press
the C/S key.
** The copy quality cannot be guaranteed if the fusing unit has not yet
reached standard operating temperature.
To cancel this mode, turn off DIP SW 101-2, then turn the main switch on
and off.
This mode must not be used in the field. The fusing and pressure rollers
may be damaged when toner remaining on the rollers melts.
1 December 1990
4-2