Specifications

Mode No. Function Data Factory
Setting
Comments
73: Color Copy
Counter
The Magnification
indicator displays
the total number of
color copies (Red +
Green + Blue).
The first three
digits are displayed
in the magnification
indicator when the
Enter key is
pressed.
Press the "." key to
display the second
three digits.
74: Color Toner ID
Detection
ID sensor check is
performed every 5
copies or 10 copies.
0: 5 copies
1: 10 copies
0 Normally, "0"
should be selected
for color toner.
75: ID Sensor Bias
(Color Toner)
Selects the bias voltage applied to the bias roller
when sensing image density.
0: Normal 1: Lighter
2: Darker 3: Darkest
76: Sorter Bin
Capacity
Sets the stack
quantity limit.
0: No Limit
1: Limit
1
77: ADF Odd
Number
Originals
(Duplex Mode)
Sets the copier to
eject the final copy
if an odd number of
originals are set.
0: On
1: Off
0 When on, the final
sheet is fed out;
when off, the sheet
stays in the duplex
tray.
*79: Color Bias
Adjustment
Adjusts color bias
output if the image
density at level 4
cannot be adjusted
in Light Intensity
mode (SP 48).
0: V
0
1: V0+40V
2: V
0+20V
3: V
0 – 20V
4: V
0 – 40V
V
0 = Standard Bias
0: Normal
1: Darkest
2: Darker
3: Lighter
4: Lightest
80: Red Toner
Density Level
Display
Displays the red
toner density level
detected by initial
setting (SP #10).
Toner Density Level
= Vsp/Vsg x 100
81: Green Toner
Density Level
Display
Displays the green
toner density level
detected by initial
setting (SP #10).
Toner Density Level
= Vsp/Vsg x 100
Data Red Blue Green
0
1
2
3
–240 V
–200 V
–260 V
–280 V
–300 V
–260 V
–320 V
–340 V
–320 V
–280 V
–340 V
–360 V
1 December 1990
4-18