Specifications

Mode No. Function Data Factory
Setting
Comments
131:Number of
Misfeeds by
Location
Display the total
number of paper
misfeeds for each
area.
0 "1" will be indicated
in the copy counter
when the Enter key
is pressed.
Press the Zoom
keys ("+" or "–") to
select the following
numbers:
1: Paper Feed
2: Exit
3: Sorter
4: DF
5: Duplex
NOTE 1: After an SP mode is selected, the copier goes automatically into
copy mode when data is changed (SP modes 37, 41-44, 47-48) or
when the Enter key is pressed (SP modes 5, 6, 11, 52, 59, 79). To
make a copy after changing data in SP mode, press the Start key.
If you do not wish to make a copy after changing data, press the
Enter key. "5" will blink in the copy counter and you can select
another SP mode.
NOTE 2: Connectors CN418 and CN421 must be repositioned and the data
in SP Mode #12 must be changed when the copier is installed in a
240V area.
NOTE 3: The following functions can be selected in SP Mode #71:
Data Function
0 1. Sort/stack mode can only be selected when the
sorter is closed.
2. In Sort/stack mode, user code #4 is displayed
when the sorter is opened.
1 User code #4 is displayed whenever the sorter is
opened.
2 1. In Sort/stack mode, user code #4 is displayed
when the sorter is opened.
2. Sort/stack mode can be selected even if the
sorter is open. User code #4 is displayed when
Sort/stack mode is selected.
1 December 1990
4-22