Specifications

Output No. Electrical Component
37 Erase Lamp
39 Optics Cooling Fans
40 Exposure Lamp + Optics Cooling Fans
42 Charge Corona + Standard Grid + Transfer Corona + Separation Corona
43 Charge Corona + ID Sensor Grid + Transfer Corona + Separation Corona
44 Charge Corona + VR Grid + Transfer Corona + Separation Corona
50 - 57 Applies bias voltage in 40V steps starting at 120V
60 - 67 Applies grid voltage in 60V steps starting at 560V
NOTE: Disconnect the duplex entrance sensor connector before using SP
Mode #9-30 to check the duplex tray paper path. Otherwise,
RA401 on the ac drive board will turn on and off (the misfeed
indicator blinks) whenever the entrance sensor is actuated by a
paper sheet.
1 December 1990
4-27