Specifications

2.5.2 Paper Misfeed Location Indicator
1. Initial Misfeed
Misfeed location indicators turn on if paper is detected by sensors when the
main switch is turned or when the front cover/exit cover is closed. Sensors
and indicators are listed below.
ITEM NO. SENSOR MISFEED LOCATION
INDICATOR
1 Registration
Sensor
Using cassette or manual
feed table
B and C light
Using upper or lower paper
tray (NOTE 2)
A and C light
Using duplex tray A and C light
2 Exit Sensor D lights
3 Sorter Paper Sensor G lights
4 Duplex Entrance Sensor E lights
5 Duplex Turn Sensor A lights
2. Misfeed during copy cycle (Misfeed Detection)
A paper misfeed indicator starts blinking to indicate that a paper jam has
been detected during the copy cycle. Sensors and indicators are listed below.
ITEM NO. SENSOR MISFEED
LOCATION
INDICATOR
1 Registration Sensor Not ON
(ON check jam)
Using cassette or
manual feed table
B blinks
Using upper or lower
paper tray (NOTE 2)
A blinks
Using duplex tray A blinks and E lights
2 Exit Sensor Not ON (ON check jam) D blinks
3 Sorter Paper Sensor Not ON (ON check jam) G blinks
4 Duplex Entrance Sensor Not ON (ON check jam) D blinks
5 Duplex Turn Sensor Not ON (ON check Jam) E blinks
6 Exit Sensor Not OFF (OFF check jam) D blinks
7 Sorter Entrance Sensor Not OFF (OFF check jam) G blinks
8 Duplex Turn Sensor Not OFF (OFF check jam) E blinks
9 Registration Sensor Not ON (ON check jam) (NOTE 2) C blinks
A
E
C
B
D
G
F
Upper Paper Tray
Lower Paper Tray (A054 Copier)
1 December 1990
4-29