Specifications

3. Misfeed during copy cycle (Misfeed Location)
1. The misfeed location indicator turns on (and stays lit) to indicate the
location of a misfeed detected by a sensor during the copy cycle.
2. The CPU determines the position of the copy leading edge by checking
jam flags "0" through "15". The CPU then turns on the misfeed location
indicator.
JF: Jam Flag
ITEM NO. SENSOR MISFEED
LOCATION
INDICATOR
Misfeed location detected by sensor
1 Registration Sensor ON C lights
2 Exit Sensor ON D lights
3 Sorter Paper Sensor ON G lights
4 Duplex Entrance Sensor ON E lights
5 Duplex Turn Sensor ON E lights
6 Relay Sensor ON (NOTE 2) A lights
Misfeed location detected using jam flags
7 Jam Flag "0" ON B lights
8 Jam Flag "5", "6", or "8" ON C lights
9 Jam Flag "7" or "9" ON D lights
10 Jam Flag "10" or "11" ON E lights
11 Jam Flag "2", "3", or "15" ON (NOTE 2) A lights
12 Jam Flag "1" ON E and A light
NOTE1: 1. If the misfeed location indicator is blinking and a misfed sheet is
detected under the corresponding sensor, the indicator continues
to blink. (Normally, the indicator stays lit to indicate the misfeed
location.)
Duplex
Turn Guide
Registraction
Roller Sensor
Cassette
Exit
Sensor
Sorter
Paper
Sensor
Duplex
Turn
Sensor
Duplex Tray
Duplex
Entrance
Sensor
7 6
5
8
9
10
11
1
0
Upper Paper Tray
Sensor
Registraction
Registraction
2
15
3
Relay
Sensor
JF JF
JF
JF
JF
JF
JF
JF
JF
Lower Paper Tray
JF
JF
JF
1 December 1990
4-30