Specifications

2. OPTICS
2.1 EXPOSURE GLASS REMOVAL
1. Take off the left scale [A] (2 short screws).
2. Grasp the left edge of the exposure glass [B] and lift up slightly. Slide the
other edge out from under the right glass holder [C]. Remove the expo-
sure glass.
NOTE: When reinstalling the exposure glass, make sure of the following:
a) The left edge of the glass is flush with the tab to the left of the
scale plate, and the right glass holder firmly secures the exposure
glass.
b) The red mark on the edge of the glass faces up. This side is
smoother and it generates less static electricity when the DF is
used.
[A]
[C]
[B]
1 December 1990
5-5