Specifications

- To reinstall -

1. Hold the rear spring plate [A] in position as shown.

2. Insert the 2nd mirror [B] into the front side plate cutout.

3. Position the rear end of the mirror under the rear spring plate in the rear

side plate cutout.

4. Fit the front spring plate over the front end of the mirror. Make sure that

the slot on each arm of the spring plate fits over the edge of the cutout as

shown.

NOTE: a) Make sure when installing the mirrors that the reflecting surfaces

[C] face the lens.

b) The front and rear spring plates are different. Make sure that each

plate is placed in the correct position.

c) Position the spring plate [D] by moving it in the direction of the

arrow.

[B]

[A]

[C]

[D]

1 December 1990

5-9