Specifications

2.4 4TH AND 5TH MIRROR REPLACEMENT
1. Turn off the main switch.
2. Remove the exposure glass. (See Exposure Glass Removal.)
3. Remove the lens cover (2 screws).
4. Remove the 4th and 5th mirror assembly drive gear [A] (1 E-ring).
5. Slide the mirror assembly all the way to the right and remove it.
6. Replace the fourth [B] and fifth [C] mirrors. (The procedure for removing
the mirrors from their brackets is the same as with the second and third
mirrors.)
NOTE: a) Make sure that the mirrors are installed in their original positions.
(The fourth mirror is larger than the fifth mirror.)
b) The front and rear spring plates are different. Be sure to mount
them in the correct positions.
c) Position the spring plates [D] as shown. Move them in the direction
of the arrow.
d) When reinstalling the 4th and 5th mirror assembly, make sure that
the hooks [E and F] are properly positioned as shown.
[A]
[E]
[F]
[B]
[D]
[C]
[F]
1 December 1990
5-10