Specifications

2.9 LENS DRIVE MOTOR REPLACEMENT
1. Turn off the main switch.
2. Remove the exposure glass and the lens cover.
3. Move the scanner to the return side.
4. Remove the tension spring and the lens drive wire [A]. Remove the rear
cover and the CC/G/B power pack [B] (2 locking supports and 1 screw).
5. Remove the lens drive motor 6P connector [C].
6. Remove the lens drive motor bracket [D] (2 screws).
7. Remove the motor [E] from the bracket (2 screws), and replace the motor.
8. Reassemble.
[D]
[E]
[B]
[C]
[A]
1 December 1990
5-22