Specifications

- Lens Drive Wire Installation -

1. Hook the spring [A] to the sensor actuator bracket [B].

2. Wind the lens drive wire [C] three and half times around the pulley [D].

3. Unhook the spring [A] and place the bead [E] at the other end of the wire

in slot [F] on the sensor actuator bracket.

4. Reattach the spring to the bracket.

NOTE: a) Rotate the lens drive pulley and make sure that the scanner drive

wire moves smoothly.

b) Position the motor harness [G] as shown when installing a new

motor.

[C]

[D]

[E]

[F]

[A]

[B]

[G]

1 December 1990

5-23