Specifications

2.10 4TH/5TH MIRROR ASSEMBLY DRIVE MOTOR
REPLACEMENT
1. Turn off the main switch.
2. Remove the exposure glass, upper cover, lens cover, and rear cover.
3. Remove the main board.
4. Move the 4th/5th mirror assembly to the left (viewed from the front).
5. Remove the motor bracket [A] (2 screws).
6. Separate the 3rd scanner drive motor [B] from the bracket (2 screws) and
replace it.
NOTE: Position the motor harness [C] as shown when installing a new
motor.
[A]
[B]
[C]
1 December 1990
5-24