Specifications

5.4 2ND PAPER FEED ROLLER REPLACEMENT
1. Turn off the main switch.
2. Open and remove the front cover.
3. Pull out the paper tray or the duplex tray.
4. Remove the feed roller assembly [A] (2 screws).
5. Replace the feed roller [B] (1 screw each).
NOTE: When reinstalling the feed roller assembly, make sure of the
following:
a) The feed rollers face up as shown.
b) The pins [C] on the end of the drive shaft fit into the slots [D] on
the end of the feed roller shaft.
c) Surface [E] of the bracket faces up.
[A]
[B]
[E]
[D]
[C]
1 December 1990
5-47