Specifications

5.5 PICK-UP ROLLER RELEASE SOLENOID AND MANUAL
FEED TABLE SWITCH REPLACEMENT
1. Turn off the main switch.
2. Remove the rear cover.
3. Remove the main board (5 locking supports and all connectors).
4. Disconnect the connectors [A and B] of the solenoid and switch.
5. Remove the solenoid bracket [C] (1 screw).
6. Replace the solenoid [D] (3 screws) or switch [E].
NOTE: Before replacing the plunger [F] (1 E-ring), first remove the paper lift
clutch solenoid assembly. (See Paper Lift Clutch Solenoid Assembly
Replacement.)
[C]
[A]
[D]
[E]
[B]
[F]
1 December 1990
5-48