Specifications

5.7 PAPER LIFT CLUTCH SOLENOID ASSEMBLY
REPLACEMENT
1. Turn off the main switch.
2. Remove the left and rear covers.
3. Remove the main board (5 locking support and all connectors) and main
board bracket [A] (1 screw).
4. Remove the sector gear [B] (1 screw).
5. Remove the pick-up roller release solenoid bracket [C]. (See Pick-up
Roller Release Solenoid Replacement.)
6. Remove the 1st feed roller spring clutch solenoid bracket [D] (1 screw).
(See 1st Feed Roller Spring Clutch Solenoid Replacement.)
7. Remove the 1st feed roller spring clutch [E] (1 E-ring).
8. Remove the paper lift assembly [F] together with the manual feed table
detection lever [G] (3 E-rings and two springs).
9. Remove the spring [H] from the actuator lever [I].
10. Replace the paper lift clutch solenoid assembly [J] (spring, collar, and
gear).
[C]
[E]
[G]
[J]
[H]
[A]
[I]
[F]
[D]
[B]
1 December 1990
5-50