Specifications

- To install -
1. Install the actuator lever [A] on the stud pin [B].
2. Set the collar [C] on the stud pin [B].
3. Install the manual feed table detection lever [D] on the stud pin [E].
4. Place the gear [F] on the paper lift clutch solenoid assembly and install it
on the stud pin [B] as shown.
5. With a pair of plyers, hook the spring [G] to the actuator lever.
6. Set the 2 E-rings and 2 springs.
[D]
[F]
[E]
[B]
[A]
[C]
[G]
1 December 1990
5-51