Specifications

5.8 RELAY ROLLER SPRING CLUTCH SOLENOID AND
RIGHT COVER SWITCH REPLACEMENT
1. Turn off the main switch.
2. Remove the rear cover.
3. Remove the solenoid bracket [A] (2 screws).
4. Disconnect the connectors [B and C] of the solenoid and switch.
5. Replace the solenoid [D] (2 screws) or switch [E].
NOTE: When attaching the solenoid to its bracket, be sure to insert the two
screws into the correct holes [F].
[A]
[E]
[C]
[B]
[D]
[F]
1 December 1990
5-52