Specifications

- Registration Rollers -
8. Remove the front and rear bushings [A] (1 screw, pressure spring, and E-
ring each) of the upper registration roller.
9. Replace the upper registration roller [B].
10. Remove the 2 bushings [C] (1 E-ring each).
11. Remove the screw [D] securing the upper and lower guide plates [E].
12. Remove the lower registration roller [F] together with the upper and lower
guide plates; then, replace the lower registration roller.
[B]
[A]
[A]
[E]
[D]
[C]
[C]
[F]
1 December 1990
5-59