Specifications

- To install -
1. Install the bushings on both the front and rear roller shafts (1 E-ring each).
2. After setting the pressure roller, install the rear pressure spring [A] while
sliding the bushing [B] up along with the rear frame as shown.
3. Slide the bushing up along with the front frame and pull the lower spring
bracket [C] up as shown.
4. To hold the spring bracket, insert a screw driver into the cutout [D] on the
front frame as shown.
5. Install the front pressure spring [E].
[A]
[E]
[B]
[D]
[C]
1 December 1990
5-82