Specifications

9.14 SIDE-TO-SIDE REGISTRATION ADJUSTMENT
When: Side-to-side registration is not within the
adjustment standard.
Purpose: To maintain the proper side-to-side registration
Adjustment
Standard:
0 ± 2 mm (0 ± 0.08")
Measure: 1. Change the lens position.
2. Change the sIde fence position in the paper
tray.
How: Shifts the copy image.
NOTE: a) When side-to-side registration is incorrect and only the paper tray
or duplex unit is being used, adjust the side fence position.
b) When side-to-side registration is incorrect for both the first paper
feed station and the second paper feed station, adjust the lens
position. Check the adjustment by making a copy from the first
paper feed station. Then, make a copy from the paper tray feed
station and adjust the paper tray or duplex unit side fences if
necessary.
- Side Fence Adjustment (Paper Tray) -
1. Pull the paper tray out.
2. Move the side fences [A] to the A4 lengthwise position.
3. Loosen the five screws [B].
4. Set the side fences to the desired position [C].
[A]
[C]
[B]
1 December 1990
5-100