Specifications

- Lens Position Adjustment -
1. Turn off the main switch and remove the exposure glass. (See Exposure
Glass Removal.)
2. Remove the lens housing cover (2 screws) and lens cover [A] (2 screws).
3. Loosen two screws [B] and shift the lens [C] from side-to-side to the ad-
just the registration.
NOTE: Do not move the lens more than 2 mm (from the center position) in
either direction (front/rear). Otherwise, the lens may contact the lens
unit rail while moving from home position to the selected reduction or
enlargement position.
4. Make sure the lens moves smoothly when charging the magnification ra-
tio.
[A]
[B]
[C]
1 December 1990
5-102