Specifications

1.17 DF ORIGINAL MISFEED OR SKEW
- Phenomenon -
When the DF is in use, the original stops on the exposure glass or is skewed
even if the electrical components are functioning normally.
- Possible Causes -
1. Exposure glass is upside-down.
2. Friction between the exposure glass and the feed belt
- Action -
Is the red mark on the exposure glass facing up?
Yes No
Reinstall the exposure glass so that the red mark faces up.
Clean the exposure glass surface with alcohol or water. Pour a small amount
of silicone oil on the exposure glass and wipe the exposure glass with a dry
cloth to reduce the friction between the exposure glass and the feed belt.
1 December 1990
6-23