Specifications

2.16 CODE #82 — JOGGER HOME POSITION ERROR
- Definition -
The output of the jogger home position sensor stays LOW while the duplex
main board is driving the jogger fences outward.
- Possible Causes -
• Jogger home position sensor shorted
• Jogger motor defective
• Duplex main board defective
• Copier main board defective
• Interface board defective
- Action -
Turn the main switch off and on.
Do the side fences move when the main switch is turned on?
Yes No
Check the voltage at CN705-2 to 5 on the duplex main board.
14V 24V
Replace the duplex main board.
Replace the jogger motor.
Is the jogger home position sensor shorted?
No Short
Replace the sensor.
Replace the duplex main board, copier main board and/or interface board.
1 December 1990
6-49