Specifications

8. ORIGINAL FEED
8.1 ORIGINAL PICK-UP
After setting the originals on the original table, the originals contact the feeler
[A] of the original set sensor and cause the feeler to move out of the sensor.
The DF then sends the original set signal to the copier CPU to inform it that
the DF will be used. When the Start key is pressed, the pick-up solenoid [B]
is energized. The original stack is then pressed between the pick-up lever [C]
and pick-up roller [D]. The rotation of the pick-up roller advances the bottom
original.
[B]
[C]
[A]
[D]
[A]
1 December 1990
8-10