Specifications

8.3 ORIGINAL FEED-IN MECHANISM
The belt drive motor [A] drives the pick-up roller [B], the feed roller [C], the
pull out roller [D], the relay roller [E], and transport belt [F] via a feed clutch
and a gear train.
The pick-up and feed-in solenoids are energized 100 milliseconds after the
Start key of the copier is pressed. Then 100 milliseconds after the solenoids
are energized, the belt drive motor starts turning. The pulse generator disc
[G] always turns when the belt drive motor is on.
Slightly after the original trailing edge passes the registration sensor, the
relay rollers and the transport belt stop turning.
[E]
[C]
[D]
[B]
[A]
[G]
[F]
[A]
1 December 1990
8-12