Specifications

13.1.8 Friction Belt Replacement
1. Turn off the main switch.
2. Remove the seal cover [A] on top of the DF cover.
3. Remove the friction belt assembly [B] (1 screw).
4. Remove the friction belt [C] (2 springs, 1 pin).
NOTE: a) When installing the friction belt assembly, make sure the friction
roller [D] is set in the correct position (See illustration).
b) If the seal cover becomes dirty or deformed, replace it with a new
one.
[A]
[B]
[C]
[D]
1 December 1990
8-41