Specifications

9.2 INSTALLATION PROCEDURE
NOTE: Do not grasp the sorter by the top cover and stay as shown by [A].
Hold both sides of the sorter as shown by [B]. This is to prevent
anti-static brush [C] damage.
1. Turn off the main switch and unplug the power supply cord of the copier.
2. Remove the strips and styrofoam blocks [D].
3. Remove the receiving tray [E].
4. Remove the caps [F] on the upper left side cover with the pliers.
5. Install the magnet catch [G] on the exit unit [H] (2 screws).
[D]
[E]
[F]
[H]
[G]
[C]
[B]
[A]
[F]
[D]
1 December 1990
9-13