Specifications

6. Install the sorter holder bracket [A] (3 screws) so that the two holes [B] on
the bracket align with the holes [C] on the copier frame as shown.
7. Install the optional DC Power Supply Unit. (See the installation procedure
enclosed with the unit.)
8. Install the sorter [D] on the sorter holder bracket (1 snap ring) as shown.
9. Install the sorter harness bracket [E] with the harness (1 screw).
10. Secure the sorter holder bracket and sorter harness bracket (2 screws).
11. Install the sorter holder bracket cover [F] (1 screw).
[E]
[D]
[F]
[B]
[C]
[A]
1 December 1990
9-14