Specifications

15. Remove the duplex connector cover plate [A] (2 screws).
NOTE: The cover plate can be thrown away.
16. Secure the optional harness duplex connector (8P/Black) [B] to the con-
nector bracket [C] (2 screws).
NOTE: When installing the bracket, make sure that the cut-out [D] on the
bracket faces up as shown.
17. Secure the connector bracket to the rear frame (2 shoulder screws).
NOTE: Make sure that the duplex harness [E] does not interfere with
lock solenoid movement.
18. Reinstall all the brackets.
[A]
[D]
[E]
[C]
[B]
1 December 1990
10-17