Specifications

12.2 JOGGER MOTOR AND JOGGER HOME POSITION
SENSOR REPLACEMENT
1. Remove the duplex tray.
2. Remove the front and side inner covers.
- Jogger Motor Replacement -
3. Disconnect CN705 [A] from the duplex main board.
4. Replace the jogger motor [B] (2 screws).
- Jogger Home Position Sensor Replacement -
3. Disconnect the sensor connector [C].
4. Remove the sensor bracket [D] (1 screw).
5. Remove the sensor [E] from the bracket and replace it (1 screw).
[C]
[D]
[E]
[B]
[A]
1 December 1990
10-21