Specifications

14.2.2 Copier Installation
1. Remove 11 strips of tape [A] from the copier.
2. Open the front cover [B], and remove 2 strips of tape [C].
3. Pull out the paper tray [D] and remove the foam blocks [E] (strips of tape)
and the silica gel [F]. On machines equipped with the duplex unit [G], pull
out the duplex unit and remove the 2 strips of tape [H].
4. Do steps 5 to 21 of the A048 copier installation procedure (page 3-5 to 9).
• See page 3-10 for the 220/240 conversion procedure.
• See page 3-11 for the cassette modification procedure.
[A]
[A]
[A]
[C]
[B]
[H]
[D]
[F]
[E]
[F]
[D]
[G] [E]
1 December 1990
11-34