Specifications

14.4 SORTER INSTALLATION
NOTE: Refer to the list on page 9-12 to check the accessories.
1. Do steps 1 to 11 of the installation procedure for the A048 copier (page
9-13 to 14).
2. Connect the sorter dc harness [A] (10P/Brown) to the harness connector
[B].
3, Secure the grounding wire [C] (1 screw, toothed washer [D], and spring
washer [E]) to the rear frame as shown.
4. Do steps 15 to 19 of the installation procedure for the A048 copier (page
9-15).
14.5 DUPLEX UNIT INSTALLATION
NOTE: Refer to the list on page 10-13 to check the accessories.
1. Follow the A048 duplex unit installation procedure (pages 10-13 to 10-18).
NOTE: Steps 2, 13, 19, and 20 in the duplex unit installation procedure are
not necessary with the A054 copier.
[D]
[E]
[C]
[B]
[A]
1 December 1990
11-38