Specifications

SP Mode Data When
Performed
33 ID Sensor Bias (Black) 0:-260V 1:-220V
2:-280V 3:-300V
EM or PM
34 ADS Level 0: Normal
1: Darker
2: Lighter
EM or PM
35 Black Toner ID Detection 0: 10 copies
1: 5 copies
37 Black Bias Adjustment 0: Normal
1: Darkest
2: Darker
3: Lighter
4: Lightest
41 Lead Edge Erase Margin Adjustment 0 – 15 EM
42 Registration Adjustment 0 – 15
43 Vertical Magnification Adjustment 0 – 15
44 Horizontal Magnification Adjustment 0 – 15
47 Focus Adjustment 0 – 15
48 Light Intensity Adjustment 100 – 150 EM and PM
49 Fusing Temperature Adjustment
175°C – 190°C
EM
51 Exposure Lamp Voltage Display - -
52 Fusing Temperature Display - -
54 Vsg Adjustment (VR102 on the main board)
4.0 ± 0.2 V
EM and PM
55 Vsg & Vsp Check - -
56 ADS Voltage Adjustment
(VR101 on the main board)
2.5 ± 0.1 V
EM and PM
59 Bias Voltage Check - -
61 Drum Wear Compensation Setting 0: 1/10h
1: 1/20h
-
62 ID Sensor Grid Voltage Setting Factory Use (The
data must be "7")
-
63 Toner Supply Unit Initial Setting - Installation
64 Black Toner Density Level Display 0 – 4 -
65 Black Developer Initial Setting - Replace-
ment
66 Drum Initial Setting -
67 Vr Correction Ratio - -
68 Vr Forced Detection - -
69 OPC Counter - -
Options and Others
70 Color Toner Supply Ratio (Fixed Mode) 0: 14% 1: 7%
2: 21% 3: 28%
EM or PM
71 Sorter Operation 0: No
1: Sorter (1)
2: Sorter (2)
Installation
73 Color Copy Counter - EM or PM